InDro Robotics hits multiple milestones in 2023

InDro Robotics hits multiple milestones in 2023

Jan 1, 2024 | InDro News, InDro Solutions, Scott Simmie, Year in Review

By Scott Simmie

 

Happy New Year!

We hope you’ve enjoyed the holiday season and that 2024 will be a good year for you.

While looking ahead, we at InDro Robotics always take this opportunity to also look back; to reflect on the year that was. In particular, we like to focus on what we accomplished. And 2023, for multiple reasons, was a very big year for us.

We designed and built sophisticated devices for some of the biggest technology companies in the world. (We really wish we could share that news, but under NDA we cannot. We can tell you that our last shipment, which took place in December, required two large transport trucks.)

And while that was certainly a highlight, there were many, many others. Let’s kick off our Year in Review with a device we’re very proud of, the InDro Backpack.

InDro Backpack

INDRO BACKPACK

 

Designed for Unitree quadrupeds (InDro is a North American distributor), the Backpack mounts onto the Unitree GO1 EDU, GO2, B1 and B2 robots. And it vastly expands their capabilities. 

First off, the Backpack enables data-dense teleoperations over 5G with virtually zero lag. Using InDro’s dashboard and intuitive control system, you can remotely operate the Unitree robots from anywhere there’s a cellular connection at both ends.

But that’s not all. The Backpack contains the Robot Operating System (ROS) software libraries, along with multiple USB slots. This makes customising these robots with additional sensors a breeze, saving a lot of engineering time. The backpack also contains a pinhole camera, offering the operator a First Person View of operations. The customisable dashboard allows the user to see data flowing in from all sensors and overall system health.

This device, inspired by InDro Commander (which does the same thing for wheeled and tracked platforms), is 100 per cent an InDro innovation from the ground up. Take a look:

InDro BackPack

YOW DRONE DETECTION

 

You may be familiar with the Ottawa International Airport’s Drone Detection Pilot Project. InDro Robotics is the core technology provider of the system, which monitors drone traffic not only immediately surrounding YOW, but from as far as 40 kilometres away.

In 2023, in addition to its regular monitoring, the system was involved with two high-profile events. First, the system detected someone flying a drone right at the airport, and in the vicinity of both a helicopter and an active runway. (This happened in December of 2022, but we could not publicly report on it until Transport Canada completed its investigation.)

The system located not only the drone (including its make and model), but the pilot as well. Police were dispatched, and Transport Canada ultimately imposed fines totalling $3021 for multiple violations of the CARs regulations. You can read our coverage here, as well as this take from Don Drones On.

The second significant event involved the visit to Canada by US President Joe Biden. Advance teams from the Secret Service and Air Force One visited YOW prior to the trip – and one of the first questions they had was whether YOW had a drone detection system in place. The system was carefully monitored during the arrival and departure of Air Force One. Thankfully, there were no incursions. Our story was picked up by sUAS News – and the CBC also covered the story:

FAA AND INDRO

 

Early this year, InDro Robotics received what we believe to be a first for a Canadian company: A US Federal Aviation Administration waiver permitting BVLOS flights for solar farm inspections in the United States.

Like our ground robots, our aerial robots are equipped for 5G teleoperation, so distance is no barrier. InDro ships the drone to the location, instructs the recipient on how to power on and visually observe – and we carry out the flight. Since receiving this waiver, we have carried out highly successful solar farm inspections in the US.

Here’s a look at how the system works.

MARATHON DRONE FLIGHTS

 

This headline has two meanings. The first is that we were flying sub-250 gram drones continuously for several hours in a relay-like fashion. When the batteries on one drone started to drain, a second was put in the air. So it was kind of a marathon in terms of continuous drone operation.

But the bigger meaning relates to the annual Montreal Marathon. InDro Robotics was called in to take part in a research trial. It was known from previous marathons that there were specific locations where runners tended to encounter difficulties and even collapse. But with no surveillance from above, it took time both to identify a runner in distress and also pinpoint their precise location.

The drones we put in the air provided an uninterrupted live feed to a tent where they were continuously watched on large-screen monitors. Sure enough, the live video did help detect and locate runners who needed assistance. You can find our story here. It was also picked up by COPA – the Canadian Owners and Pilots Association. Their coverage is here.

Below: Our crew kept sub-250 gram drones in the air for hours at the Montreal Marathon.

BIG CLIENT, COOL ROBOT

 

A major international company (a household name, truly), asked us to build a robot for them. Specifically, a research robot they could deploy in crowds of people. Engineering lead Arron Griffiths explains:

“The client wants to use Vision SLAM (Simultaneous Localisation and Mapping) to essentially detect humans and pathways through chaotic environments,” he says.

“Think malls, shopping centres…where humans are mingling to navigate around. And there’s no really defined path, the robot must organically move around people. Yes, you’d have an overall predetermined path with a desired destination, but once the chaos of humans comes in the robot would safely meander its way through crowds.”

The client was so pleased with the result they agreed to allow us to show the finished product. You’ll note the height – which was necessary so that sensors could be placed at roughly eye-level of the humans it avoids. You can find more technical details about the project here.

This is a perfect example of one of InDro’s key functions: A client comes to us with an idea for a product that has not yet been created. In deep consultation – and with plenty of updates along the way – InDro designs, builds, tests and ultimately delivers the finished product.

Below: The robot navigates crowds along a boardwalk

Robotic Innovations

DARTT OPENS!

 

June saw the opening of the new Drone and Advanced Robot Training and Testing centre, or DARTT, at Area X.O in Ottawa. The state-of-the-art facility was funded by the Government of Canada through the Federal Economic Development Agency for Southern Ontario (FedDev Ontario) and in-kind industry contributions from InDro Robotics.

DARTT is the first facility of its kind in Canada, built from the ground up for the testing of ground robots (wheeled, tracked, quadrupeds and bipeds) and drones. The robot testing area consists of multiple sets of obstacles build to specific criteria set out by the National Institute of Standards and Technology (NIST). Robots can be tested on various uneven surfaces, through varying aggregates (sand, gravel, etc.) and through water. There’s even an incline ramp that can be adjusted to test the ability of robots to climb.

InDro operates the facility, helping to test the limits of robots – and their operators. DARTT also contains a large netted enclosure for testing new drone technologies that might otherwise require a Special Flight Operations Certificate from Transport Canada. (Plus, the top of that large enclosure can serve as a safety net when testing drone parachutes.)

InDro offers flight reviews and advanced and specialised drone and robot training at the site. We are also planning to launch a series of Micro-Credential courses in 2024, allowing for short-duration, intensive training in specific drone technology skills.

You’ll find a more thorough story about DARTT here, as well as a video below.

INDRO TAPPED FOR SPECIALIZED DRONE MISSIONS

 

It’s not uncommon for InDro to be approached to participate in research trials involving drones (the Montreal Marathon is but one example), but also in emergency situations. This year saw both.

When wildfires threatened many regions in British Columbia, the City of Kelowna contacted InDro. Might we be able to assist in mapping some of the damage? And could we use thermal sensors to detect hotspots that might be smouldering beneath a landfill?

We jumped into action quickly, selecting our partners at Spexi Geospatial to carry out the flights using their special software. That system allows the pilot to select an hexagonal area of interest (a “Spexigon”), and the drone will take off and carry out the mission autonomously. It will ensure that photos are taken at the correct intervals and a consistent altitude so the back-end stitching goes seamlessly. Plus, a pilot can fly multiple Spexigons in a single mission, allowing all of that data to produce imagery at scale. Resolution is very high, at 3 cm/pixel.

During one 2023 mission, “over 10,000 acres of imagery was captured in three days,” says Spexi COO Alec Wilson.

“We’ve made it super simple to get images in and out at scale… And we’re super-excited to be able to start building bigger and better platforms for the drone industry.”

InDro has invested in Spexi Geospatial, as we can see the value of automated image capture at scale. Already, Spexigon has carried out trials where it has captured two entire BC cities in a matter of days, with much bigger projects on the horizon.

You can read more about our work in Kelowna here, and more about Spexi here.

Below: Spexi COO Alec Wilson speaking in Ottawa at the Aerial Evolution Association of Canada’s annual conference.

Alec Wilson Spexi

URBAN WIND TUNNELS

 

InDro has previously teamed up with the National Research Council of Canada on research projects. For example, we’ve pushed several drones to their limits in the NRC’s wind tunnel in Ottawa to compare the ability of drones to withstand high winds when compared with the manufacturer’s specifications.

This year, the NRC asked if we could help with an even more challenging project: Measuring urban wind tunnels.

The NRC is interested in how drones react in urban settings, where windspeeds can be greatly influenced by architecture. Tall buildings in close proximity can turn a stiff breeze into something approaching a gale, along with producing wind shear, strong vortices and other invisible threats to drone flight.

But just because you can’t see these unusual air patterns doesn’t mean you can’t measure them. In conjunction with the NRC, we outfitted an InDro drone with two small, highly sensitive anemometers that measure windspeed. They were mounted on a wishbone-like device, allowing the sensors to be clear of prop-wash for more accurate measurement. One anemometer was mounted vertically, while the other was angled horizontally. This allows researchers to measure the precise angle of the wind, including localised updrafts and other anomalies.

Chief Pilot Eric Saczuk was the Pilot-in-Command on these challenging operations, which took place over multiple days in Montreal. The data will not only help researchers understand and predict the impact of urban wind tunnels, but may also result in useful guidelines for companies flying drones in urban environments.

 (We also carried out some research flights in Vancouver Harbour, flying through a specific corridor near congested airspace, all while measuring the quality of 5G signals throughout the flight.)

You can read about the NRC wind tunnel research in greater detail here. The image below shows the drone with both anemometers attached.

NRC Wind Tunnel Montreal Eric

INDRO “FORGES” AHEAD

 

One of the major highlights of the year involves InDro Robotics now offering a plethora of new fabrication and design services. In a strategic partnership with Invest Ottawa, what was known as the Bayview Yards Prototyping Lab is now called InDro Forge and under the management of InDro Robotics.

The facility is equipped with a wide array of additive and subtractive manufacturing capabilities, including:

  • CNC machining
  • Silicone and urethane casting
  • Multi-element 3D printing (including metal)
  • Electronics and Printed Circuit Board fabrication and analysis

There’s even a water jet table capable of cutting through several inches of steel.

The facility offers services ranging from one-off prototypes to design and full product development. If you can dream it; InDro Forge can build it.

“Some of our other clients come to us where they have an early prototype that they’ve cobbled together. It tells them that their idea is possible but it’s not a product yet,” says InDro Forge lead Joel Koscielski. “So we’ll help them turn that into a more refined version of itself. We might do one of those, we might do five – even 25.”

Projects can be big – or small.

“Sometimes it’s just that extra bit of capacity – they themselves have never had to make a sheet metal box that looks good,” adds Koscielski.

In addition to serving clients in need of prototypes, Minimum Viable Products and limited production runs, InDro also now has the ability to fabricate in virtually any material for our own projects – which will shorten timelines.

Below: A powerful water jet table at InDro Forge. It uses high-pressure water mixed with an exceedingly fine aggregate to cut through pretty much anything with precision

Advanced Manufacturing

STREET SMART ROBOT

 

Another of our 2023 milestones was the design and fabrication of what we call the Street Smart Robot. Its purpose is to ensure safe winter cycling.

Canadian cyclists are a hardy bunch, and many of them don’t let the winter season stop them from utilizing bike lanes. But with winter comes hazards – ice, potholes, debris – that can pose a threat to a safe cycling experience. The Street Smart Robot (SSR) has been built to drive through bike lanes autonomously – while scanning for the above hazards and more. Once it detects an anomaly, City of Ottawa (where it’s being tested) maintenance crews will be notified.

“The idea behind the robot is we want to prolong the use of bike lanes in Ottawa, but also ensure the safety of bike lanes in Ottawa,” explains Indro Robotics Account Executive Luke Corbeth.

“There’s really two parts to this: The first is a machine vision element to see if conditions are good enough for biking – no ice, not too many leaves, etc. On the safety side, the Street Smart Robot is more concerned with detecting things like potholes and cracks. And the idea is if you’re able to identify those things, the right resources can be deployed faster and more efficiently to solve the problem in a timely manner.”

 

PARTNERSHIP

 

The SSR came about thanks to a research and development fund called the Wintertech Development Program. Its purpose is to support “Ontario small and medium enterprises (SMEs) and their partners to validate, test, prototype, and demonstrate new products and technologies designed to meet the unique demands of winter weather conditions.” InDro matched the funds via the work it carried out.

Wintertech is run by OVIN, the Ontario Vehicle Innovation Network. That’s a province of Ontario initiative which “capitalizes on the economic potential of advanced automotive technologies and smart mobility solutions such as connected and autonomous vehicles (CAVs), and electric and low-carbon vehicle technologies, while enabling the province’s transportation and infrastructure networks to plan for and adapt to this evolution.”

There’s a *lot* of technology packed into the SSR, including sensors and compute power to ensure both obstacle avoidance and AI/Machine Vision recognition of potential threats. Technology onboard includes:

  • Front and rear-facing depth cameras that perceive in 3D
  • Two 2D LiDAR units for obstacle avoidance and safety
  • Two 3D LiDAR sensors for Simultaneous Localization and Mapping (SLAM)
  • GPS and Inertial Measurement Unit
  • Range finder to detect the height and position of hazards like tree branches on the path

There’s a lot more to this machine, and you can find all the details here. InDro will be testing the IP67 robot in early 2024, once there’s plenty of snow and ice in Ottawa.

Below: A brief video highlights the Street Smart Robot, unveiled at TCXpo in September.

TCXpo

 

September brought the second annual TCXpo event to Area X.O. It’s Canada’s premiere showcase of Smart Mobility, with leading technology companies from across the country demonstrating their products. This year saw more than 75 firms take part with active demos, static displays, and plenty of learning sessions.

The event was sponsored by Transport Canada (that’s the “TC” in “TCXpo”), along with Invest Ottawa and Innovation, Science and Economic Development Canada (ISED).

InDro was kept busy with running demos of the new DARTT facility, putting ground robots through demanding obstacle courses and flying drones inside the netted enclosures. There were plenty of other cool demonstrations and displays, ranging from a self-driving tractor through to a remotely operated hang-glider intended for heavy cargo deliveries.

As Michael Tremblay, who was then President and CEO of Invest Ottawa, Area X.O and Bayview Yards, put it: “We’ve got incredible capability right across the country.”

It’s a great event, and one that truly highlights that the era of Smart Mobility is firmly en route. Kudos to the organizers for putting on such a great show.

Below: A few images from the 2023 TCXpo, including the InDro Robotics Ottawa team behind some of our many robots. That’s followed by a video highlighting the event.

 

Philip CAV Canada Drone Panel

Philip on drone panel

Indro Robotics CEO Philip Reece moderating a CAV Canada panel

Tractor

And on this farm there was a robot, Ee-eye, ee- I/O

Pilotless hang glider

Remotely operated hang glider

Nokia Pod

Nokia drone with charging station for remote operations

SSR Street Smart Robot

Street Smart Robot

The Ottawa InDro team, with the SSR highlighted

Wingtra liftoff

A Wingtra drone takes flight during TCXpo

Good dog

InDro’s Luke Corbeth with the Unitree B1 quadruped at DARTT

NDT Demo

A Skygauge Robotics drone demonstrates its non-destructive testing abilities

WAIT, THERE’S MORE

 

There’s actually a *lot* more, but we know you’ve got other things to do in 2024. So just a final few highlights:

 

  • InDro forged a new partnership (and product) in conjunction with Tallysman on a super-accurate GNSS solution for ground robots
  • We refined our popular InDro Commander, an InDro innovation that enables remote teleoperation and the rapid integration of sensors. A smaller Commander is en route soon!
  • We welcomed – and are modifying – new robots from Unitree and AgileX (InDro distributes products from both companies)
  • We have a new Robot Operating System (ROS) drone (more to come on that soon)
  • We’ve been working hard on a new automated inventory management system, designed to simplify warehouse supply chain management

 

INDRO ON THE ROAD

 

Finally, InDro attended a number of major conferences and exhibitions throughout the year. We displayed and demonstrated our products at many of them, and forged partnerships at others. Among the many events we took part in:

There were more, of course. But these were the highlights.

Below: Unitree’s new “Digit” biped robot, at IROS in Detroit

Unitree's new Digit biped

INDRO’S TAKE

 

Every year at InDro Robotics is busy, with many milestones reached. But 2023 was a little bit different. There were more projects, more milestones, new partnerships – and more clients. The company continued to scale, with the hiring of many more engineers and supply chain/admin staff.

The addition of InDro Forge is a highly significant addition to our portfolio, offering rapid prototyping and custom fabrication for clients, as well as new onsite capabilities for our own projects. And, because this post focussed exclusively on InDro Robotics, we didn’t even get into the amazing things happening at sister companies Aerometrix (which focuses on gas detection) and Bravo Zulu Secure, our drone detection/mitigation operation. Look forward to hearing more about those companies in 2024.

“2023 was an exceptional year at InDro. The company continued to scale, and our engineering team yet again outdid itself with new products, new milestones – and continued commitment to hard work and innovation,” says InDro Robotics CEO Philip Reece.

“Our management and sales teams also pushed the envelope, bringing in major ongoing projects that we look forward to revealing in 2024. And our marketing and content leads made great inroads in getting out the word about what InDro’s been doing, along with our continued growth trajectory. I’m grateful to all of our staff, our clients, and our many partners – with a special thanks to Area X.O, Invest Ottawa, and YOW. Here’s to 2024!”

On behalf of everyone at InDro Robotics, we wish you a Happy, healthy, and productive New Year.

As always, if you’d like to get in touch feel free to contact us here.

 

Good dogs: A look at the newest Unitree quadrupeds

Good dogs: A look at the newest Unitree quadrupeds

Dec 20, 2023 | InDro News, Industry News, Quadrupeds, Scott Simmie, Unitree Robotics

By Scott Simmie

When people think of robots, they often picture industrial robotic arms doing repetitive work on assembly lines: Precision welding, picking and placing objects – those sorts of applications. Or perhaps a wheeled platform carrying a load from one location in a factory to another.

In recent years, however, new algorithms and technologies have led to an increase in the number of quadruped robots. These are the four-legged devices that inevitably remind observers of dogs, since they have roughly the same shape and move with a similar gait. They’re also (depending on the robot) roughly the same size as medium to large dog breeds.

The most well-known of these is likely Spot, built by Boston Dynamics. Built primarily for industrial inspections, this machine has also taken the spotlight (excuse the pun) with choreographed performances with the likes of Cirque du Soleil.

In fact, videos of Spot dancing proved so viral that Boston Dynamics produced a video to clarify that its robot is capable of much more:

THE QUADRUPED ADVANTAGE

 

Why four legs? Why not just wheels, like most mobile robotic platforms?

Good question. And we put that to InDro Robotics Account Executive Luke Corbeth.

“In most predictable environments, wheels or tracks will suffice,” he says.

“Quadrupeds excel at unpredictable terrain. You can start looking at complex infrastructure like refineries, where there might be stairs or pipes that need to be stepped over. Quadrupeds are also suitable for Search and Rescue, where there might be rubble on the ground or potentially unsafe conditions. Robots like these are very good at navigating terrain that would be impossible for a robot with wheeled or tracked locomotion.”

 

UNITREE

 

Unitree Robotics is one of a small but growing number of firms specializing in these robots. Its founder is Wang Xinxing, an engineer who started working on quadrupeds roughly a decade ago at Shanghai University. He built his first quadruped, XDog, by designing and building virtually everything, including motor drive boards, the master-slave architecture, the legs – and more.

All that hard work led to the founding of Unitree in 2016. And Wang and his team of engineers have never stopped trying to push the envelope. As the Unitree website explains, the company puts a heavy emphasis on R&D:

“Unitree attaches great importance to independent research and development and technological innovation, fully self-researching key core robot components such as motors, reducers, controllers, LiDAR and high-performance perception and motion control algorithms, integrating the entire robotics industry chain, and reaching global technological leadership in the field of quadruped robots. At present, we have applied for more than 150 domestic patents and granted more than 100 patents, and we are a national high-tech certified enterprise.”

We’re going to explore two new models from Unitree in just a moment, but it’s worth taking a look back at the early days. This video was uploaded seven years ago – after XDog was already in development for more than a year.

 

THE GO2

 

One of the new Unitree quadrupeds is the GO2. This is a step up from the GO1 EDU, which has been popular for research and development, corporate innovation parks, and even entertainment. (Yes, like Spot, the GO series can also dance – but they also do *much* more than that.)

The GO2 is a significant redesign from the GO1 series. Unitree has dropped some of the multiple cameras from the GO1 and developed its own LiDAR module, called the L1. It features a 360° x 90° hemispherical capture. With a minimal blind spot, Unitree says the GO2 is 200 per cent better at recognizing its surroundings than the GO1 series. It can detect surroundings as close as .05m away.

Because of the LiDAR, it’s obviously capable of mapping even unfamiliar surroundings and avoiding obstacles, meaning it’s perfect for Simultaneous Localization and Mapping (SLAM) applications. In conjunction with that LiDAR, the GO2 features the new NVIDIA Orin Nano for powerful onboard AI-enhanced EDGE computing

“From my experience, the LiDAR does a much better job at SLAM than the depth cameras on the previous models,” says Corbeth. “The obstacle avoidance is really good out-of-the-box and it can obviously be improved on with development (GO2 is Open Source). And the Orin is a really notable upgrade when it comes to computing power.”

 

INTERNAL AND EXTERNAL AI

 

One of the more intriguing features is that the GO2 is integrated with Chat GPT and can respond to voice commands. You could ask it to explain Einstein’s Theory of Relativity and it would speak the answer to you. More useful, though, is that you can instruct the GO2 to carry out certain tasks by voice.

“If you say: ‘Hey, go back to where I first turned you on,’ then it’s going to return home. So that’s a practical use. This is one of the first robots that can accept voice commands out-of-the-box and literally action some of those voice commands.”

You can even ask GO2, viat Chat GPT, to generate code for new tasks. Think about that for a moment.

It’s also capable of wireless charging. The GO2 can rest itself on a small optional pad and be ready for its next mission without human intervention. There’s also an option for a servo arm if a manipulator is useful for your application. It’s faster than the GO1 EDU, capable of trotting along at 5 metres/second. The GO2 also has a significantly longer run time – between two and four hours, depending on how strenuously it’s working. Battery capacity and endurance have jumped by 150 per cent compared to the previous model.

“The locomotion – their internal algorithm for how the robot moves – is much improved. So it can go faster, it’s more reliable, it’s quieter,” adds Corbeth. Firmware upgrades are OTA (over the air), with user authorisation. The GO2 connects via 4G, Wi-FI6 and Bluetooth.

Unitree Go2 Quadruped

USE-CASES

 

Though the GO2 could be used for basic industrial applications, it’s intended more for R&D and education (there’s even the option of drag-and-drop block coding). InDro Robotics is also capable of modifying the robot with our InDro Backpack – which enables data-dense 5G operation with an easy-to-use dashboard and comprehensive documentation. The Backpack also contains USB slots for additional sensors, as well as the Robot Operating System (ROS) code necessary for seamless integration.

“Anything the GO1 could do, the GO2 can do better, faster, longer,” says Corbeth.

There are even variants available – the GO2 Enterprise and GO2 Enterprise Plus – with some additional bells and whistles intended for law enforcement, Search and Rescue and other First Responder applications. Those features include dual backup communication links, a searchlight and emergency flashing lights, an additional camera and the ability for two-way voice communication.

Here’s a look at the basic GO2 in action:

THE BIG DOG

 

Unitree’s other new quadruped is the B2. It’s an incredibly powerful, enterprise-level machine that can be deployed in even the most demanding conditions. Use-cases include:

  • Industrial asset monitoring and surveillance
  • Search and Rescue/First Responder work
  • Carrying heavy payloads/cargo over even rough terrain
  • Working in water (Ingress Protection rating IP67)

Capable of moving at 6 metres per second (21.6 km/hour), Unitree says the B2 is the world’s fastest enterprise-level quadruped.

“That’s really fast – like ridiculously fast,” says InDro’s Corbeth.

“The B2 is designed less for development and more for real commercial applications. It’s also Open Source, which differentiates it from quadrupeds like Spot, or those made by Ghost Robotics,  ANYmal, etc. So we have the option to deploy proprietary software on it that we’ve built and designed, or our partners have built and designed.”

Like its predecessor the B1, the size of the B2 is striking. It weighs 60 kg and measures 1098mm x 450mm x 645mm.

B2 Robot

INDUSTRY-READY

 

Straight from the box, the B2 is ready for a variety of use-cases. With strength and endurance, this machine has been tested carrying a 45 kilogram load 7.98 kilometres on a single charge (or 20kg more than 15 km). If it’s not carrying a load, it can walk more than 20 kilometres non-stop.

The B2 can handle slopes of 45° with ease, even in rough terrain. It can even walk on greasy or oil-covered floors without falling down. (You’ll see an impressive demo involving banana peels shortly.)

Unitree has measured a 170 per cent improvement in joint performance over the B1, with 360 Nm (Newton-metres, or 265.5 foot-pounds) of torque. Run-time is vastly improved, with the B2 capable of operating between four and six hours on a mission (depending on terrain, payload and speed). The heavy-duty battery is designed for rapid swapouts, and the option of autonomous wireless charging via pad is an option.

From the factory, the B2 is equipped with a 32-wire automotive-grade LiDAR, two depth cameras, a high-resolution optical camera, and a high-capacity 45Ah (2250Wh) battery.

“And the B2 can be further customized, either directly from the factory or by InDro Robotics for specific use-case scenarios,” says Account Executive Corbeth. “We can integrate additional sensors, including thermal and even gas-detecting modules according to client needs. And, of course, we can also outfit the B2 with the InDro Robotics Backpack, which enables 5G operation and allows for rapid integration of additional sensors.”

All of those are great options to have, but Corbeth emphasizes “this quadruped is also capable of starting work straight out of the box.”

 

BUILT TOUGH

 

Make no mistake. This robot has been built to thrive in punishing conditions, including operating in water. It’s also very strong, capable of bearing a load of 120kg while standing. Control and perception are managed by multiple processors, including an NVIDIA Jetson Orin NX, three Intel Core i7s and an Intel Core i5. (These can vary if you’re looking for a custom factory build.) Plus, of course, InDro has expertise in modifying all of the Unitree quadrupeds pending client needs.

“InDro Robotics does have the ability to outfit these with any sensors that aren’t standard from Unitree,” explains Corbeth.

Plus, there’s also the option of wheels. The lower legs can be swapped out with wheeled versions. If the B2 is operating on flat terrain these are more efficient than walking.

“This option combines the best of both worlds between a legged and a wheeled robot – you get the speed and efficiency of a wheeled robot, yet with the other legs it can also climb stairs and manage rubble or other obstacles on the ground,” he adds.

And how does this new machine compare to the competition? Unitree says its measured parameters are superior – and there’s agreement from Corbeth.

“Compared with Spot, ANYmal and Ghost Robotics, I think we’re very competitive on the hardware side. I actually think Unitree has got to the point hardware-wise where it’s now superior to pretty much all the other options.”

Have a look for yourself:

INDRO’S TAKE

 

As a North American distributor for Unitree, we obviously have faith in their products. We’ve also been partnered long enough to see the company’s commitment to continuously and meticulously advancing its products. These are excellent and durable quadrupeds, as our many clients will attest.

InDro also takes pride in supplementing Unitree’s documentation to get clients up and running quickly, and on those rare occasions when something goes wrong – we know how to repair them.

“Unitree is quickly becoming a world leader in the quadruped sector,” says InDro Robotics CEO Philip Reece.

“The new models are exceptionally well-built, with significant gains in power, run-time and processing abilities. Plus, add-ons like the InDro Backpack make these quadrupeds even more versatile for virtually any use-case scenario.”

Interested? Get in touch with us HERE to arrange a demo.

Canadian Advanced Air Mobility Consortium attends Dubai Airshow

Canadian Advanced Air Mobility Consortium attends Dubai Airshow

Dec 6, 2023 | Advanced Air Mobility, CAAM, eVTOL, Scott Simmie

By Scott Simmie

 

Ever been to a *really* big airshow?

The two best-known take place in the UK and France on alternating years. One is the Farnborough International Airshow (been there twice), and the Paris Airshow (Salon du Bourget). From the biggest passenger-carrying jets in the world down to the tiniest fastener, these massive events include every element in the aerospace supply chain (and then some). From Airbus to Rolls Royce, in-flight entertainment systems to military-spec rivets, you’ll find them there.

One of the other major global events is the Dubai Airshow. With more than 1400 exhibitors and 180+ aircraft on flying or static display, it’s also a must-attend.

This year’s event took place November 13-17, and one of the key themes was the rapidly approaching era of Advanced Air Mobility. That’s the world where transformative and sustainable aircraft (including air taxis) will play a role in transporting goods and people both within major cities and to smaller communities not currently served by traditional aviation. Many if not most of these new aircraft are being designed for eventual autonomous operation.

Canada, of course, has a stake in this new world. In fact, we recently wrote about the purchase by Vancouver’s Helijet of an eVTOL aircraft (a BETA Technologies ALIA 250) for crewed operations in British Columbia. So we were pleased to see that the Canadian Advanced Air Mobility Consortium (CAAM) attended – and presented at – the Dubai Airshow.

 

Dubai AAM

CAAM

 

Formed in 2019, CAAM is the national voice representing Advanced Air Mobility in Canada. With 70+ members spanning industry, government, academia and associations, CAAM plays a crucial role in this emerging sector. Its stated vision is to create “A unified national strategy for Zero-Emission Advanced Air Mobility with regional implementation in Canada.” And its mission?

“To build an ecosystem of national collaboration in creating and operating a sustainable, equitable and profitable Advanced Air Mobility industry in Canada.”

CAAM is led by Executive Director JR Hammond, who represented the organization – and by extension, Canada – at the Dubai Airshow. We asked him for his own short definition of AAM:

“It changes our concept of how we move people, goods and resources across our cities and regions. With these new aircraft we no longer are constrained to just railways, marine or ground transportation,” he says.

Dubai was Hammond’s first international air show – and it left quite an impression.

“We were blown away not only by the representation of Advanced Air Mobility in the RPAS sector, but how leading organizations globally – Asia, North America and Europe – brought aircraft and technology to the Middle East to showcase. This bubbling of activity globally is only expediting our operational pathways.”

Below: The Archer Aviation Midnight, an electric AAM vehicle capable of flying 160 kilometres (100 miles). The aircraft has been optimized for shorter flights of roughly 32 km (20 miles) with a charge time between flights of just 12 minutes.

 

 
CAAM Dubai AAM

THE CATALYST

 

The spark for the trip came from CAAM’s national board, says Hammond. It suggested to the executive team it would be worthwhile for the organization to have a greater presence at global gatherings – and specifically at air shows.

While a lot of AAM attention focuses on the impressive emerging aircraft technology, Hammond says there are a number of pillars that must be aligned for Advanced Air Mobility to truly take flight. Obviously, there’s the Uncrewed Traffic Management aspect – the safe integration of pilotless aircraft into traditional airspace.

But there are many other challenges CAAM has been exploring and believes are integral to the future success of AAM.

“There’s a lot of other pillars that countries and different delegations are not focusing on – like the insurance industry, or the cyber security aspect of communication. So we were tasked by the board to showcase Canada – how we can bring all of these different pillars to the global scale. A lot of these nations are not doing this and they’re seeing the challenges.

“The great example given is United Arab Emirates, which arguably is one of the leaders in AAM with their Drone Up operations… They have not focused on how they’re going to integrate this into conventional airspace, how they’re going to bring this on with different telecommunication providers and insurance providers. That’s what we’re focusing on right now and they were learning a lot from us.”

Below: JR Hammond (holding microphone) onstage during one of two sessions where he was a panelist. The first was “Pathway to eVTOL commercialisation” and the second was “Advanced aerial cargo delivery advancements.”

 

JR Hammond CAAM Dubai

GETTING THERE

 

There’s a lot of work ahead.

Obviously, there’s the development, validation and certification of aircraft. Though there are some full-scale designs now operational (such as the EHang EH216-S, which was certified in October by the Civil Aviation Administration of China), many companies are still working with scale models or Minimum Viable Products. Certification through agencies like the FAA is, by necessity, a methodical and demanding process that takes years.

There’s also the question of how to safely integrate these new vehicles into airspace currently used by traditional aviation. Will there be specific low-level flight corridors set aside for smaller AAM aircraft/RPAS in urban settings? (Mostly likely yes, and almost certainly in Canada and the US. In fact, InDro is involved in some of the research and test flights for this).

Will there be rules around where and how many Vertiports (takeoff and landing sites for eVTOL aircraft) can be established in cities? Will certain use-cases, such as urgent medical deliveries, take priority in the early phase of adoption to build public acceptance? What role in standards and operational guidelines will the International Civil Aviation Organization (ICAO) ultimately play?

And then there are those pillars JR Hammond alluded to: Communications, insurance, cyber-security and more.

It sounds like a lot to overcome – and it is. And that’s why conversations and panels like those which took place in Dubai are so critical as the move to AAM begins to accelerate.

“Even though we are all at different stages, the amount of collaboration already occurring in saying: ‘We need to solve this together’ was by far greater than anything than I’ve ever seen before in aerospace or business,” says Hammond.

So the commitment and collaborative spirit is there.

Dubai Hammond AAM

THE PATH TO AUTONOMY

 

There is a consensus, particularly with passenger-carrying aircraft, that the jump to autonomous flight won’t be immediate. There will be a graduated approach, starting with a pilot on board those aircraft. It’s anticipated early flights will be manually controlled, then monitored by a pilot still capable of taking over if required.

“In terms of autonomy, any market entry piece will happen with a pilot on board with full control and an augmented system similar to the autopilot systems that we have on commercial airliners today,” says Hammond.

“Then, as regulations and social acceptance and – of course – our policies increase, then we can move upwards on our autonomy scales towards that ‘human in the loop’ and then of course autonomous aircraft at some point in the future.”

But, says Hammond, it will be cargo deliveries – both intra-urban and inter-regional – that will come first.

“We need autonomous operations today in the cargo space before we even have a chance at the passenger space… And more resources and more efforts are needed to solve out what those air corridors can look like, with autonomous aircraft operating in our conventional airspace.”

Below: Mid-sized drones like this, carrying medical or other critical supplies, will likely be the vanguard of the transition to AAM.

 
Dubai Hammond AAM

INDRO’S TAKE

 

With a variety of InDro Robotics delivery drones – including a model proven in trials for temperature-sensitive medical deliveries between hospitals – InDro has a vested interest in the AAM future. But it’s not just about us – far from it.

“I believe AAM will be truly transformative – and I’m not talking about the delivery of coffee and bagels to someone’s back yard,” says InDro Robotics CEO Philip Reece.

“Advanced Air Mobility will mean that critical – and even life-saving – products can be quickly and safely transported across cities and to nearby regions in a fraction of the time of traditional ground delivery. It’s going to mean that people in some remote and isolated communities will be able to board regular or on-demand flights for the first time ever,” he adds.

“Plus, sustainable flight will play a significant role in reducing greenhouse gas emissions at a time when such measures are very much needed.”

We were pleased to see JR Hammond and CAAM representing Canada’s AAM interests – and solutions – on a global stage. (And, if this is your first introduction to AAM and CAAM, you can find out more in our primer here.)

All images, with the exception of JR Hammond on the panel, courtesy of Dubai Airshow.

TLR – Technology Readiness Levels – explained

TLR – Technology Readiness Levels – explained

Dec 4, 2023 | Engineering, InDro News, Industry News, Scott Simmie

By Scott Simmie

 

So: You’ve got a great idea for a new technology product or process.

That’s the first step: A concept that you’ve put some thought into. Of course, there’s a long road ahead before that brilliant idea becomes an actual commercial product. But how do you gauge that progress as you move along the development path? How would you describe where you’re at in a way that others might quickly grasp?

Luckily, there’s a tool for that. It’s called the Technology Readiness Levels scale, or TRL.

“It’s a standard measuring stick for everyone to communicate where they are with development,” explains InDro Robotics Engineering Lead Arron Griffiths.

The TRL tool was first developed by NASA researcher Stan Sadin back in 1974 with seven basic levels. It would take another 15 years before the levels were formally defined, during which time two additional levels were added. There are now nine steps up the ladder, where TRL 9 is the equivalent of a working product that could be mass-produced or commercialized.

Which means, of course, that Level 1 is at the very beginning of the technology development process.

“Level 1 is universally seen as a napkin idea – where you’ve jotted down a concept,” says Griffiths.

That’s a perfect analogy for TRL 1.

For greater clarity, each level on the scale offers a short definition, a description, and examples of activities. The short definition for Level 1 is “Basic Principles Observed and Reported.” The description is “Lowest level of technology readiness. Scientific research begins to be translated into applied research and development (R&D).”

In terms of examples, Level 1 “Activities might include theoretical studies of a technology’s basic properties.” And yes, that could include a napkin sketch.

Below: Aerospace is one of many industries to use TRLs. The noise-reducing chevron nozzles seen on the cowling below would have gone through each of the nine levels. Photo via Wikimedia Commons by John Crowley.

TRL chevrons

MOVING UP THE SCALE

 

Great! You’ve got that napkin sketch done.

Obviously there’s a lot to do between that initial idea and a finished product suitable for commercialization. To get to TRL 2, you simply need to put more thought into it. You’re not actually building or programming yet, just putting greater clarity and focus on what you hope to accomplish.

TRL 2 is defined as “Technology concept and/or application formulated.” Here’s its description:

“Invention begins. Once basic principles are observed, practical applications can be invented. Applications are speculative, and there may be no proof or detailed analysis to support the assumptions.”

You could think of this stage as refining the idea, with activities limited to research and/or analytical studies.

TRL 3 means you’re actually beginning the R&D process. This might include some lab or analytical studies. At this stage you’re trying to validate predictions you’ve made about separate elements or components of the technology. The components you’re working with aren’t yet integrated – nor is it expected that the components you’re working with are at their final version.

TWO TRL SCALES

Before we move along, it’s worth noting there are actually two different TRL scales in use. The first (and the one we’re using here) is the NASA scale. But the European Union has its own TRL scale. 

“So there is some cloudiness,” explains Griffiths. “Typically the top and bottom of the scales are the same, but the middle moves around a bit. You have to be sure people are reading from the same scale. Typically when I talk to a client, I will show them the scale I am using.”

Griffiths also emphasizes that during R&D, the phase of development doesn’t always slot neatly into one of the TRL stages. 

“It’s typical to say: ‘We’re roughly about TRL 6’ – it’s not an exact science.”

Below: The InDro Commander module, with LiDAR sensor. This popular commercial product, which allows for rapid integration of ROS-based robots and sensors (and more), is TRL 9.

Teleoperated Robots

CLIMBING THE LADDER

 

American inventor Thomas Edison once said: “Genius is one per cent inspiration and ninety-nine per cent perspiration.” The same could be said of the process of inventing a product for commercialization. Once that napkin sketch is done (the one per cent), there’s still a lot of methodical slogging ahead. (Trust us, we know.)

TRL 4 is the stage where you’re putting things together. Basic components are integrated and readied for testing in a simulated environment. The short definition, via Canada’s Department of National Defence, is “Component(s)/subsystem(s) and/or process validation in a laboratory environment.”

The logical progression continues with the next step.

“TRL 5 means it’s ready for testing in a lab environment,” explains InDro Lead Engineer Griffiths. He also adds that this middle stage – TRL 4 through 7 – “is always the difficult part.”

Once TRL 5 is passed, it’s time to start seeing if the integrated components will work together in a simulated or lab environment. At this stage, TRL 6, the product is considered to be getting pretty close to its desired configuration. Yes, there will be further tweaking to come, but you’re getting there.

Below: InDro’s Street Smart Robot (the large white unit). The product has been built but not yet deployed in winter conditions. This would be at TRL 7. Every other robot in this image would have made it to TRL 9.

 

SSR Street Smart Robot

NEARLY THERE!

 

All that hard work has been paying off. Your product is assembled and has been tested in simulation or other lab environment. Now it’s time to get it out into the real world to see how it performs. Congratulations, you’ve reached TRL 7, where “Prototype system [is] ready (form, fit, and function) for demonstration in an appropriate operational environment.”

“TRL 7 is more like a long-term deployment. Once you can show it to be working in a real-world environment – outside of the lab – then you get to Levels 8 and 9,” says Griffiths.

These final two levels are usually pretty exciting. Once the product/solution has been proven to work in its final form – and in the environment where it’s expected to be deployed as a product – you’ve reached TRL 8. Just one more to go.

 

THE FINAL LEVEL

 

Remember that Street Smart Robot you just saw a picture of? Well, it’s ready to go. And once the wintry conditions take hold in Ottawa, we’ll be operating that machine in ice and snow on Ottawa streets. Specifically, on bike lanes in Ottawa, where it will detect hazardous conditions (including potholes) that might pose challenges for safe cycling. City of Ottawa maintenance crews will then be notified of the problem (and its location) so they can address the issue. (You can read more about the SSR here.)

And once the SSR is operating smoothly in those intended conditions? We will have achieved TRL 9, meaning “Actual solution proven through successful deployment in an operational setting.”

NOT ALWAYS A SMOOTH PATH

 

It’s easy enough to describe these levels. And in doing so, it can appear to be a straightforward, linear path where engineers move seamlessly from one level to the next. Reality is not quite so simple. Depending on the project, progress in the early stages can be made very rapidly.

“Most people get up to Level 5 fairly quickly,” says Griffiths. “You can even get to Level 5 in a day if you’re doing software development – you can literally go from an idea all the way up to a basic rudimentary prototype.”

But – as flagged earlier – things get a little trickier once you hit those middle levels.

“You can think of it as walking up a hill to Level 5,” he says. “Then there’s this valley. A lot of stuff dies in Level 6 and 7. There’s not a lot of success there because once you push the technology into actual environments the success rate is very low. So a lot of time is spent in Levels 5 and 6 trying to make a system that can make it to Level 7 successfully, and then on to Level 8 – where you’re essentially across the valley.”

Below: A graphic outlines the short definitions of Technology Readiness Levels

Technology Readiness Levels

INDRO’S TAKE

 

The TRL scale is extremely useful in the R&D world, in that it concisely conveys where a product is along the path to commercial development. And while it’s great for engineers, it’s also useful to help clients understand where one of our products is along that journey.

We’ve scaled this ladder many times over the years. Sometimes it’s a relatively easy climb. But, like all Research and Development companies, we’ve also had a few products that never made it beyond the valley Arron Griffiths described. That’s R&D.

“The Technology Readiness Level scale is a really useful tool, and part of our daily language at InDro Robotics,” says CEO Philip Reece. “Each level represents unique challenges – and that valley Arron described can sometimes be a disappointing bit of landscape. But we learn something even with the occasional failure.

“Thankfully, we have a creative and tenacious engineering team that seems to thrive on difficult challenges – and InDro now has a growing stable of products that have achieved TRL 9 and gone on to commercial success.”

If you’re working on your own project and would like to know where it is on the TRL scale, you can use this assessment tool from Industry, Science and Economic Development Canada.

 

That’s a wrap: Another great Aerial Evolution Association of Canada Conference

That’s a wrap: Another great Aerial Evolution Association of Canada Conference

Nov 20, 2023 | Aerial Evolution Association of Canada, Drone Detection, Industry News, Scott Simmie

By Scott Simmie

 

What a great show.

The Aerial Evolution Association of Canada (formerly Unmanned Systems Canada – Systèmes Télécommandés Canada) held its annual conference and trade exhibition November 7-10 in Ottawa. The event had an excellent turnout, along with the usual selection of high-quality learning sessions.

There was plenty of discussion around the coming world of Advanced Air Mobility, where new and transformative aircraft (many of which are innovative new autonomous drone designs with detect-and-avoid features) will routinely deliver heavy cargo and even passengers over dense urban centres and to regional communities not currently served by traditional aircraft.

Another timely topic was the increasing use of drones in the conflict in Ukraine, as well as the latest developments in Counter-UAS technologies (including both detection and mitigation). There was even a live demonstration of a new kinetic C-UAS drone that uses a net to disable and capture a rogue RPAS.

Reps from Transport Canada and NAV Canada were on hand to discuss proposed changes on the regulatory landscape and – always an important part of these gatherings – hear questions and concerns directly from the industry. These open exchanges have long been a hallmark of the annual event.

AEAC Plenary

FIRST NATIONS

 

There was a notable emphasis this year on Indigenous use of drones and other technologies, including a powerful session about detecting unmarked burial sites on the grounds of former residential schools. The concept of data sovereignty – who owns data captured on unceded territories – was also discussed. There was even a presentation on how drones have helped to capture important First Nations cultural events. Plus, of course, the employment and opportunities that RPAS education and initiatives are creating for Indigenous entrepreneurs and communities.

Below, one of the Indigenous panels, moderated by Kristin Kozuback (C)

DRONES AND LAND MINES

 

SAIT‘s Shahab Moeini talked about a program using UAS to detect land mines using AI, machine vision and sensor fusion. Many previous and current efforts have used magnetometers, but these metal-detecting sensors are neither effective nor appropriate given that many land mines are made of plastics and other non-metallic materials. Machine Learning is being used to train drones to recognise the many, many, different types of land mines – even if only a portion of the device is visible above ground.

“Land mines,” said Moeini, “are the nastiest creation of mankind.”

Below: Shahab Moeini, who runs SAIT’S Centre for Innovation and Research in Unmanned Systems (CIRUS)

SPEXI

 

Among the many excellent and innovative presentations, one by Spexi Geospatial caught our attention. The Vancouver-based company has built software that allows pilots of micro-drones to automatically fly and capture hexagonal-shaped areas the company calls “Spexigons.” Each Spexigon covers 22 acres and when an adjacent Spexigon is flown the data and imagery are seamlessly connected. With enough Spexigons captured, you’ve got a high-resolution version of Google Earth – and a ton of use-cases for the data.

The Spexi software carries out the flights automatically using DJI sub-250g drones, flying standardized capture missions to produce imagery at scale. The data is uploaded to the cloud where it’s stitched together to form highly detailed images of very large areas with a resolution of 3cm/pixel. (A satellite, by contrast, captures at 30cm/pixel while a standard airplane generally captures at 10cm/pixel.)

During one recent mission, “over 10,000 acres of imagery was captured in three days,” explained Spexi COO Alec Wilson.

“We’ve made it super simple to get images in and out at scale… And we’re super-excited to be able to start building bigger and better platforms for the drone industry.”

Below: Spexi’s Alec Wilson explains how the system works…

Alec Wilson Spexi

WOMEN IN DRONES

 

This year’s conference saw an increased emphasis on Women in Drones.

Though this has been on the agenda at past events, the 2023 event had somehow a different feel: The recognition that women are not only increasingly entering and shaping this male-dominated sector, but that many are high-level subject matter experts making significant contributions.

While progress has been made, there’s still work to do on the equity front. And there was a strong sense the AEAC is committed to achieving that.

Below: The close of the Women in Drones breakfast

AEAC Women in Drones Breakfast

RECOGNITION

 

One of the most memorable parts of any Aerial Evolution Association of Canada conference is the awards ceremony. Individuals and organizations that have made outstanding contributions to the RPAS industry are nominated, voted for by their peers, and selected for recognition. Recipients range from student engineers (the RPAS CTOs of tomorrow) through to service providers, manufacturers – and even government agencies.

Those honoured at this year’s conference include:

  • Dr. Frederique Pivot: Pip Rudkin Individual Achievement Award
  • Jacob Taylor: 2023 Indigenous Innovation Award
  • National Research Council of Canada Aerospace Research Centre: 2023 Organizational Achievement Award
  • Bryan Kikuta, Toronto Metropolitan University: 2023 Mark Cuss Memorial Scholarship
  • Ana Pereira, University of Victoria: Best Student Oral Presentation Award (judged)
  • Aman Basawanal, Carleton University: Best Student Technical Paper Award (judged)

Below: The National Research Council Team receives its award

WAIT, THERE’S MORE

 

There was one more award recipient to whom we’d like to give a special shout-out. It’s Katelin (Kate) Klassen, who received the 2023 Aerial Evolution Ellevatus Award “for her outstanding dedication in uplifting, empowering, and inspiring women in the Canadian RPAS sector.”

Kate is truly a pioneer in this field. A multi-rated private pilot and flight instructor with traditional aircraft, Kate has been a significant force in the drone field for years. She’s an educator (her online courses have trained more than 10,000 pilots), a lobbyist (she’s taken part in multiple consultations with regulators – including being co-chair of the CanaDAC Drone Advisory Committee), and a true advocate for RPAS education. Her knowledge of the Canadian Aviation Regulations (CARs) is legendary – and she has inspired and encouraged countless women (and men) in this industry.

Plus, she’s truly an all-round awesome human being – always willing to share her time and expertise. Congratulations, Kate – and all the other winners!

Kate (C) looking justifiably happy…

Kate Ellevatus

ALSO WORTH NOTING (AND CELEBRATING)

 

Though they didn’t receive any awards, three key members of the Association certainly merit public recognition for their contributions. Jordan Cicoria (CEO of Aerium Analytics) did an outstanding job as Conference Chair. In fact, he’s overseen the last two in-person conferences, while also taking the helm of the virtual gathering during the peak of the pandemic. That’s a *lot* of work, and Jordan has carried out these tasks both professionally and modestly while juggling a plethora of moving parts.

A lot of work on the conference – and elsewhere – came from AEAC Executive Director Declan Sweeney. Declan worked hard behind the scenes (and on countless calls) with sponsors, exhibitors, membership drives – you name it. He’s also deeply involved in the annual student competition. Declan does it all with professionalism, and a great sense of humour.

Equally deserving of recognition is AEAC Chair of the Board Michael Cohen (also the CEO of Qii.AI).

Michael has been serving the Association well, and was key in the transition and rebranding from Unmanned Systems Canada / Systèmes Télécommandés Canada to the Aerial Evolution Association of Canada. This was far more than a name change, but an organizational shift to reflect the coming era of Advanced Air Mobility. He’s been instrumental in the Association’s push toward greater Diversity, Equity and Inclusion – which was reflected in the conference agenda.

The Association also benefits greatly from Michael’s extensive knowledge and background; he’s a former commercial jet pilot – a distinct advantage when discussing the Big Picture (and the minutia) with regulators.

Thank you, all.

Below: Jordan Cicoria (L) with Declan Sweeney, followed by Michael Cohen (R) with Transport Canada’s Ryan Coates

Jordan Declan
Michael Cohen Ryan Coates

INDRO’S TAKE

 

As always, we were pleased to participate at the annual Aerial Evolution Association of Canada conference. In addition to the sessions, the networking and the trade exhibit – it’s of tremendous value to have the industry and the regulators together for collaborative discussions. There’s been tremendous progress in this sector over the past decade, and much of that is due to regulators truly working with the industry to safely advance RPAS use in Canadian airspace, including BVLOS flight and other more complex operations. Technology that was seen almost as a threat in the early days is now being accepted as a useful – and critical – adjunct to the overall world of aviation.

InDro Robotics staff appeared on multiple panels; CEO and AEAC Board Member Philip Reece, pictured below, took part in the Counter-UAS panel and a live demo of kinetic C-UAS drone at Area X.O‘s Drone and Advanced Robotics Training and Testing (DARTT) facility. (That’s Philip below.)

Philip Reece

BUT…

 

We’d be lying if we didn’t tell you that a true highlight for us was seeing Kate Klassen receive the Ellevatus Award.

“One might easily conclude we’re happy simply because Kate is a flight instructor and regulatory expert with InDro Robotics,” says CEO Philip Reece. “But that’s really just a sliver of the truth. Kate’s contributions over the years have been plentiful, significant, and lasting. We’d be applauding this recognition just as loudly even if she didn’t work with InDro.”

We are, however, very happy – and fortunate – that she does.

 

YOW Drone incident recounted in WINGS magazine

YOW Drone incident recounted in WINGS magazine

Nov 20, 2023 | Drone Detection, Industry News, Scott Simmie, YOW

By Scott Simmie

 

If you follow the news from Indro Robotics regularly, you’re likely aware we’re the key technology provider for the YOW Drone Detection Pilot Project.

For several years, we’ve been involved in detecting drones flying in proximity to the Ottawa Macdonald-Cartier International Airport. The data is collated into regular reports and shared with partners including Transport Canada, NAV Canada and the RCMP. It has also proven invaluable in assisting YOW with developing protocols for drone incursions and even apprehension of individuals violating RPAS airspace rules.

Among the project highlights we’ve covered in the past:

These stories have been picked up by multiple news outlets in the past, including the Ottawa Citizen, CBC  News, sUASNEWS, DroneDJ – and many more. In fact, here’s one those CBC pieces, covering the drone detection used during President Joe Biden’s visit:

THE YOW INCURSION

 

One 2022 incident at YOW, where the pilot was caught in the act, has received a lot of attention throughout the industry. The operator was ultimately fined $3021 for violating a number of rules laid out in the Canadian Aviation Regulations (CARs).

The incident not only proved the real-time capabilities of the technology (including its ability to locate the pilot), but highlighted the many specific regs that had been violated. Transport Canada investigated and ultimately issued significant sanctions – a cautionary tale for those who might be uninformed about or wilfully violate the strict rules governing RPAS use in close proximity to airports/aerodromes etc.

This week, we noticed WINGS Magazine highlighted the story in its November/December edition.

WINGS YOW

PLAY-BY-PLAY

 

The data obtained during that December 2022 incursion is highly detailed. In fact, it offers a moment-by-moment description of how the flights went down (and up), along with how YOW authorities responded to the event. You can find the WINGS article online here, but we’ve also pasted it below for your convenience.

Apologies for the split headline, but this was a double-truck page.

WINGS YOW INCURSION ONE
WINGS YOW INCURSION TWO

INDRO’S TAKE

 

We’re grateful to WINGS Magazine Editor Jon Robinson for amplifying our YOW drone incursion story. The more that incidents like these are publicised, it’s reasonable to assume that fewer will occur as people learn more about the regulations and penalties.

It’s also clear, as was demonstrated at the 2023 Aerial Evolution Association of Canada conference, that drone mitigation technology continues to improve. During the event, there was a demonstration of a drone that can track down and disable a rogue RPAS with the kinetic firing of a net. (Radio Frequency jamming is not permitted under Industry Canada rules except in extraordinary circumstances.)

“We’re pleased to see that this story is still making the rounds, and hopefully educating drone operators who may be unfamiliar with the rules and penalties,” says InDro Robotics CEO Philip Reece.  

“But we’re even more pleased to see that incidents such as these are relatively rare. The YOW Drone Detection Pilot Project has captured very valuable data over the years – and continues to do so.”

Interested in drone detection and mitigation solutions for your airport, stadium or other sensitive asset? InDro subsidiary Bravo Zulu has multiple options and can be contacted here.