Cypher Robotics and Captis gain buzz at GITEX GLOBAL 2024

Cypher Robotics and Captis gain buzz at GITEX GLOBAL 2024

Oct 17, 2024 | Captis, cycle counting, Cypher Robotics, GITEX GLOBAL 2024, Scott Simmie

By Scott Simmie

 

It is, as the saying goes, “The biggest show on earth.”

At least it is if you’re talking about technology and AI. We’re referring here to GITEX GLOBAL 2024, running from October 14-18 at the Dubai World Trade Centre. It’s the largest and most influential tech and AI show on the planet, spanning 40 halls with 6,500 exhibitors and more than 200,000 buyers. From the largest global tech and AI firms right down to the most innovative startups, it’s all there in one place.

That also means, as an exhibitor, there’s a lot of competition for eyeballs. For example, Tesla is there with the latest iteration of its humanoid robot Optimus – which was unveiled at a splashy event hosted by Elon Musk just last week. The latest autonomous vehicles are on display, including air taxis from the coming world of Advanced Air Mobility.

It could, at a show of this magnitude, be easy for an exhibitor to get lost in the crowd. But Canada’s Cypher Robotics – and its cutting-edge cycle counting/precision scanning solution Captis – is garnering plenty of attention on the world stage.

“We knew there was demand for a solution like ours, but the response has been phenomenal,” says Founder/CEO Peter King. “And the show’s not even over.”

Below: The Cypher Robotics inventory counting solution Captis, in a major Canadian warehouse where it’s been deployed for a year, followed by a video showing Captis in action

Cypher Robotics Captis

THE CAPTIS SOLUTION

 

The revolution toward Industry 4.0 – where automation and AI are intertwined for greater efficiency – is well underway. Industry leaders like Amazon are already extensively automated with robotic systems to assist with fulfilment and inventory counting. For many other large companies, however, that voyage is just beginning. And there’s tremendous interest in solutions that can bring autonomous and accurate solutions to the warehouse floor.

“The response at GITEX GLOBAL 2024 has been tremendous,” says King. “And not just from retailers with large warehouses that need cycle counting and precision scanning. We’re also having serious discussions with clients from the Third Party Logistics (3PL) and healthcare sectors.”

That’s because Captis is like no other solution on the market.

“Captis can work non-stop for five hours, autonomously scanning inventory in even massive warehouses up to a height of 15 metres,” says King. “It captures data that is instantly and securely integrated with existing warehouse management platforms with 99.9 per cent accuracy. Not only does it read any kind of code on stock, it can also do RFID scanning. The efficiencies we’ve seen with our flagship client in Canada are amazing.”

 

HOW IT WORKS

 

For many companies with large warehouses, scanning is still done manually. That means workers repeatedly moving down massive aisles with a handheld scanner. It’s not very satisfying work and is prone to human error. The task also tends to have high attrition rates. In warehouses with inventory stacked high (as most are), there’s the added element of risk from having a human work at height on a forklift or other elevated platform.

Captis changes all this.

The Captis base is a low-footprint autonomous mobile robot (AMR). That base, on its own, is capable of automatically capturing RFID tags, or creating a precise digital twin of a space for planning scenarios. When its five-hour mission is complete, it returns and recharges wirelessly at its base. Its small size means no infrastructure changes are required at warehouses – something often required for other AMR and cycle counting solutions.

But the exceptional value proposition comes from the ability of Captis to work at height. That’s because it’s not simply an AMR – but an AMR with embedded drone technology.

A Robot Operating System (ROS) based drone rests atop Captis. It’s linked to the base via a lightweight tether. That tether provides power to the drone, and transfers data between the two. As Captis makes its way down warehouse aisles, the drone ascends directly above it. The drone is equipped with multiple sensors to read any and all inventory codes. That data is then instantly migrated into existing Warehouse Management Software or Warehouse Execution System platforms. Captis has been tested and certified by one of the world’s leading AI fulfilment software companies and integrates seamlessly with its platform.

Captis has been deployed at a major Canadian retailer – a company with some 300 large warehouses across the country – for more than a year. It has saved 250,000 person-hours of work and generated significant additional revenue for the client by identifying discontinued or excess stock that can be discounted and sold to pave the way for current inventory. It has also freed up forklifts and other machines that would otherwise have been used to assist with human scanning at height.

“Captis is a proven solution,” says King. “And I think that’s part of the reason there’s so much interest here at GITEX GLOBAL 2024.”

Below: A snapshot of the multiple value propositions Captis brings to the table (and the warehouse), followed by a video detailing the Captis mobile app released at GITEX GLOBAL 2024

Cypher Robotics value prop

INDRO’S TAKE

 

The genesis of Cypher Robotics was the identification of the need for an all-in-one solution: Cycle counting, RFID scanning, and precision scanning for digital twins. That’s how the idea for Captis came about. It was an ambitious concept that would require exceptional and dedicated engineering. InDro Robotics offered its support as incubator, assisting with the immense technical challenges which had to be overcome for this system to work.

“Indro Robotics is proud to have assisted Cypher Robotics take Captis from a concept to a market-ready robotic solution,” says InDro Founder and CEO Philip Reece.

“The move toward Industry 4.0 is accelerating, and products like Captis – with autonomous cycle counting, RFID capture and precision scanning – will play critical roles in this revolution. We’re pleased, but not surprised, to hear Captis is garnering a lot of attention in Dubai.”

Interested in learning what Captis can do for you? Reach out here. You can also download a news release about Cypher Robotics and Captis at GITEX GLOBAL 2024 here.

Cypher Robotics, GreyOrange discuss the future of warehouse automation

Cypher Robotics, GreyOrange discuss the future of warehouse automation

Sep 23, 2024 | Captis, Cypher Robotics, Inventory Management, Scott Simmie

By Scott Simmie

 

What will the future of warehouse automation look like?

You might picture autonomous mobile robots (AMRs) moving heavy loads from point A to point B. There could be pick and place robots grabbing specific items from inventory shelves and relocating them, or putting them in boxes. AMRs equipped with manipulator arms might be loading or unloading trucks. Other devices could be scanning existing inventory to ensure companies have accurate and realtime information on precisely what is on hand.

All of these technologies are here now – and, to varying degrees – are being implemented as companies transition toward a more efficient and cost-effective way of doing things.

But such systems involve a lot of moving parts that need to be coordinated. And when you throw actual people into the mix, along with building infrastructure, things get a lot more complicated.

So what will this future look like? And, just as important, how can we ensure worker safety while coordinating all of these complex machines and interactions?

That was the topic of a fascinating webinar put on recently by Robotics 24/7. Entitled Rise of the Robots: Driving Safety & Adoption with Multiagent Orchestration, the webinar was hosted by Robotics 24/7 Editorial Director Tim Culverhouse. It featured Akash Gupta, CEO and Co-Founder of GreyOrange – an AI-driven supply chain software leader that specialises in warehouse fulfilment. The other guest was Peter King, CEO and Co-Founder of Cypher Robotics.

 

CYPHER ROBOTICS

 

This company, which was incubated by InDro Robotics, builds robots for precision inventory counts using both optical and RFID scanning technologies. Its signature product, Captis, was launched earlier this year to significant buzz at the massive Automate 2024 conference. Cypher Robotics and GreyOrange also announced a partnership at that conference.

We’ll dive into the webinar conversation in a moment. But first, a look at Captis. It’s an autonomous mobile platform that does three things, and does them all very well. With a five-hour runtime, Captis can:

  • Autonomously scan inventory optically using a tethered drone attached to the AMR Captis base
  • Autonomously scan inventory using RFID
  • Create ultra-precise digital twins of a warehouse space

Captis has been deployed for more than a year with a large Canadian retailer that has hundreds of huge warehouses across the country. Captis has proven itself on the warehouse floor, providing the retailer with realtime inventory updates and saving employees from the risky (and often unsatisfying) work of repeatedly manually scanning stock – some of which is 10 metres above the ground.

Below: Captis, at work in a Canadian warehouse. You can see the drone on top of the Captis base

Cypher Robotics Captis

THREE PILLARS

 

Watching the webinar, it became clear there were three overarching themes involved with any sound implementation of robotics into the workplace/warehouse space. They are:

  • Worker safety
  • Orchestration of multiple robotic devices into a seamless single system, even with highly complex inventories
  • Return on Investment

Both GreyOrange and Cypher Robotics were aligned on these pillars, with the former focussing on comprehensive software solutions and the latter on an efficient and safe device that can keep workers from repetitive and potentially dangerous tasks while offering a clear value proposition to the client.

From the GreyOrange side, a large part of the solution is its GreyMatter realtime fulfillment platform, an AI-powered software designed for multi-agent orchestration. In other words, ensuring that the right robot or agent is doing the right thing at the right time.

“GreyMatter is pretty much an automation-first warehouse execution system capable of automating…the end-to-end of the warehouse,” explained GreyOrange CEO Gupta. “We support 10 to 15 different robotic technologies on our platform that in GreyMatter is agnostic to any of these robotic technologies that you can deploy in any of the processes of the warehouse.”

Another key part of GreyMatter is what Gupta calls its Certified Ranger Network.

“It’s basically a group of robotic technologies that are…seamlessly integrated with GreyMatter. We also certify them for reliability, safety and security.” (The Cypher Robotics Captis is part of that Certified Ranger Network.)

Working in concert with all of this is a piece of mobile software created by GreyOrange called gStore.

“It’s end-to-end integration orchestration within the four walls of the stores…inventory management, store operations, Omni channel execution, customer experience, (gStore is) basically kind of bringing all of that together.”

Collectively, said Gupta, you can think of these working synergically to ensure that the “agent up-time or robotic up-time gets converted into fullfillment outcomes.”

Below: A graphic from the presentation outlining how the GreyOrange system works

GreyOrange GreyMatter

FROM THE CYPHER SIDE

 

CEO and Co-Founder Peter King comes with the perfect background for the job. He spent 10 years in the supply chain and logistics industry, followed by 15 years in the robotics and drone sectors. Cypher Robotics, he says, “is kind of a marriage between those realms.”

Several years ago, King was approached by a massive Canadian retailer that wanted to look at an automated solution for its warehouses. The product needed to be able to count inventory autonomously (including boxes high up on racks), had to be highly accurate, and – ideally – would work with the company’s existing infrastructure. In other words, no physical changes to warehouse layout would be required.

That’s no small task. And work on what would become Captis began in 2021.

“It’s an AMR/drone combination product,” said King. “It’s both a vision-based and RFID capture system. And that product works harmoniously together to autonomously go up and down aisles counting inventory. What makes us unique is our ability to trundle up and down aisles for up to five hours collecting data, unlike some traditional methods today.”

While some companies offer drone-based solutions, they come with limitations. Batteries have to be frequently changed and run times are limited. Because the drone is tethered to the Captis base, it draws power from that base enabling vastly extended flight times. As the drone hovers above, Captis navigates autonmously down the aisles. Captis can also capture precise digital twins of any environment it’s deployed in. All of the data acquired optically by the drone – or by Captis itself in RFID or digital twin mode – is meshed real-time into the client’s Warehouse Management System (WMS).

The product formally launched in March – and has since gained considerable interest in the industry.

“We’re gaining a lot of traction and realising just how big this marketplace is,” he added.

Cypher’s main clients are retail operators with large warehouses, but the company is also moving into Third-Party Logistics (3PL) and healthcare. And, as you’ll see in a moment, has truly proven its worth with its flagship client.

Below: An overview of the Captis system

Meet Captis

CASE STUDY

 

Due to the extensive work Captis has been doing with a major Canadian retailer, Cypher Robotics has been able to pull together a case study that reflects the product’s ROI.

In one large facility alone, said King, “we’re anticipating that we are going to eliminate 250,000 man hours per year.”

Those are hours that largely would have been spent by people manually scanning products, an intrinsically unsatisfying task with poor job satisfaction and high attrition rates. But King emphasised those savings don’t mean jobs are being lost; rather, that employees can be transferred to more satisfying work.

“There’s a very long conversation around robots replacing workers and, in this case, we’re actually looking to shift those hours into more productive areas of the business and help this current client actually keep employees in the facilities as well.”

The Cypher solution has had other significant bottom-line benefits for this client.

Online orders that have to be cancelled because an item is out-of-stock are a huge pain point for large companies. If the inventory cycle count isn’t highly accurate, items that are unavailable can show on the web as being in stock. Those orders, which wind up being cancelled, can add up to huge potential losses. That’s because, in addition to resources spent refunding to customers, the company has lost large numbers of potential sales.

With Captis onboard, King said those unfulfilled online orders have been reduced by 50 per cent. Ensuring customers were ordering items in stock led to $7.5 million in additional annual revenue for just this one client.

What’s more, because Captis can easily track how many discontinued items are in stock, it alerts the retailer to put an emphasis on selling those items in order to clear the way for new stock.

“We’re reducing the discontinued inventory by 12 per cent, so another 1.2 million dollars in overall sales for this client,” said King. “We think that’s a big deal by allowing them to push discontinued product and make sure that they understand what areas of their business they need to focus on to eliminate that inventory.”

In addition, King said the system has enabled the client to reduce their cancelled orders – leading to roughly one million dollars in additional annual revenue. With this particular client, the system has proven its worth many times over.

But there could be more benefits down the road. Cypher Robotics is exploring with the client how to identify spare room in those massive warehouses that could be put to profitable use by leasing that space to third parties.

“One of the things you’ll see on our road map is the ability to provide fulfillment services for unused space,” said King. “So understanding how much space is in your warehouse (that could be available) to allow other organizations to access – understanding what your utilization rates are allows you to understand what inventory looks like at each of your facilities to make sure that you’re managing (space) appropriately. For this one client specifically, we can see that there’s a huge need in this industry.”

Below: Details from the Cypher Robotics case study

 

Captis Case Study

INDRO’S TAKE

 

The picture is becoming pretty clear, at least for large-scale warehouses and fulfillment/3PL companies: Automation is the future.

But the key here is that this future must be carefully orchestrated. You can’t simply throw a bunch of AMRs and other automation into a facility – particularly with human beings walking around – without concerns for worker safety, including equipping those machines with the best available sensors and AI for detecting and avoiding people and other objects. Wherever possible, you also want to avoid costly infrastructure changes to accommodate these technologies.

But the bigger picture – as described in the webinar – is the importance of certifying these machines and the overarching orchestration of how all of these moving parts work together. And not only work together, but do so in the most efficient and logical way possible. Software like GreyMatter and gStore are half of this equation; robotic solutions like Captis and other complementary systems are the other half.

“As the incubator of Cypher Robotics, InDro is exceedingly proud to see the great strides this company has made in a relatively short time period,” says InDro Robotics Founder and CEO Philip Reece. “Cypher Robotics and Captis do more than count inventory and create digital twins in a highly accurate and timely fashion; they provide critical and actionable data that has proven to significantly improve the client’s bottom line. Technologies like this also play an important role in keeping employees out of potential harm’s way – and allow them to carry out more satisfying tasks.”

Interested in learning more about Cypher Robotics and Captis? You can download a deck here. And if you’d like a conversation, you can contact Cypher Robotics here.

Cypher Robotics and Captis gain attention at Automate 2024

Cypher Robotics and Captis gain attention at Automate 2024

May 8, 2024 | Cypher Robotics, Inventory Management, Scott Simmie, Stacey Connors

By Scott Simmie

 

Cypher Robotics was on the road this week. Specifically, the InDro-incubated company was at the big Automate 2024 show in Chicago. It’s North America’s largest robotics and automation event, and a conference that’s geared toward the industrial sector.

Looking for a robot that can pick and place? Move inventory off a truck and into a warehouse? How about an Autonomous Mobile Robot (AMR) capable of lifting and moving even immensely heavy loads? You’ll find all of that – and more – here. There are even manipulators that can mix drinks or make you a fine cappuccino. It’s a showcase for the future (and even the present) of everything from manufacturing to the restaurant space. And it’s all in one place.

This short video provides a pretty good overview. Trust us, there’s a lot of robotics at this show.

CYPHER ROBOTICS AND CAPTIS

 

If you follow the news from InDro on a regular basis (and who doesn’t?), you’ll likely recognise the Cypher Robotics name. The Ottawa-based company specialises in robotic solutions for cycle counting and inventory management at scale. InDro Robotics has an incubation agreement with Cypher Robotics, and assisted in the development and testing of its signature launch product – Captis.

Captis is a system that integrates an autonomous ground robot with a drone that’s attached to the base with a tether. That tether provides power for the drone and handles data between the drone and the ground robot. As the robot navigates even narrow warehouse aisles, the drone ascends to the various levels of stock on the shelves. That Robot Operating System- (ROS) based drone then scans any and all codes (it’s code-agnostic) on products as the robot works its way forward.

And the data? It’s instantly integrated into a company’s existing Warehouse Management System (WMS), WCS (Warehouse Control System) and WES (Warehouse Execution System) software. The power storage in the Captis base means autonomous missions can last up to five hours before the system returns to home for wireless recharging. This is a huge differentiator from solutions that count stock with a drone alone, since flight times are limited.

What’s more, Captis is also capable of autonomous RFID scanning, with the same data instantly loaded into those same management systems. So you can actually set Captis free on a showroom floor and it will find its way around using its own brains and sensors – all while counting stock.

“Operations managers and pretty much everyone on the floor understands how important it is for inventory to be accurate in their Warehouse Management System,” explains Stacey Connors, InDro’s Head of Strategic Initiatives. She was at Automate 2024 on behalf of Cypher Robotics.

“Organizations that want to make the right business decisions quickly need to be empowered with the data of what inventory they have on hand at any given time so they can pull quick triggers. ‘How much do we have and where is it? Do we want to sell product X to a reseller or distributor?’ Inventory accuracy and data are invaluable in making these decisions quickly,” says Connors.

 

PARTNERS

 

Already, Cypher Robotics has forged some powerful partnerships in the industry. It has teamed up with AI fulfilment leaders GreyOrange, global telecommunications innovator Ericsson, and a leading Canadian retailer with several hundred retail locations across the country. (In fact, much of the testing and hardening of the Captis system took place in one of that partner’s massive warehouses.)

Cypher Robotics has also quickly gained attention. When Captis was displayed at the big Modex convention earlier this year, it gained significant buzz – and was even covered by the likes of TechCrunch. That’s not surprising, since Modex is a convention that focusses on automation within the supply chain. Though Automate 2024 had a broader focus, Captis once again attracted a lot of interest. Cypher Robotics was invited by Ericsson to share its display, which focussed on a wide range of robotic and IoT solutions that operate over 5G or private 5G networks – which Ericsson supplies. (Captis can also operate and transfer data over secure WiFi.)

Cypher Robotics Captis Automate 2024

COMPLEX SIMPLICITY

 

The appeal of Captis is simple: It’s hands-free and highly accurate. It literally goes about and does its cycle counting or RFID scans on its own, working shifts of up to five hours before recharging. Most warehouses still rely on manual solutions, sending people out with hand-scanners to carry out what is a pretty dull and even potentially dangerous task. (Think of how high some of those warehouse stacks are.)

Attrition rates are high, because human beings get bored of highly repetitive tasks, especially if they’re intrinsically unrewarding. In one of the cases we looked at, a 1.2 million square foot warehouse that runs 24/7 has a human being scanning full-time on all three shifts, throughout the day and overnight. A single Captis unit can do all of this more efficiently and accurately, allowing those people to find more satisfying or meaningful work.

“It is a mundane job that is hard to keep people in because you train them and three months later they’re tired of counting so they move on. So labour attrition and retention is an issue, and human error in a mundane job is a reality,” explains Connors. “Cypher stands out from all of the solutions because just a single device is needed for even a million square foot warehouse.”

 

AND THAT’S NOT ALL

 

The other big feature of Captis is its ability to multi-task. Specifically, it can carry out precision 3D scans of industrial spaces in extraordinary resolution while it’s doing other work. These scans are valuable for planning, monitoring construction or renovations, simulations prior to adopting other technologies – even for creating plans to duplicate an entire facility.

“I’d say half of my conversations at Automate 2024 were around the ability of Captis to capture a precise, digital point cloud of their environment while it’s doing other tasks,” says Connors.

“A theme throughout the entire conference was how critical simulation is prior to or during the assessment or adoption of a new technology. And in order to have an accurate simulation, you need an accurate representation of the environment. Captis provides this.”

Before we wrap up, it’s worth mentioning that while the tethered drone and extraordinary run-times are key components of this system, some of the most complex magic is due to the robot’s autonomy stack. With its proprietary combination of hardware and software, Captis can be placed in a completely unfamiliar, GPS-denied environment and still get the job done.

“The secret sauce of our total solution is absolutely the embedded autonomy,” says Connors.

 

Below: Stacey Connors with Captis at the Modex show

 

Stacey Connors Captis MODEX

INDRO’S TAKE

 

Automate 2024 is an important conference, showcasing the cutting-edge in industrial robotics right across the sector. It was the perfect venue to let interested parties know about Cypher Robotics and its Captis solution. It was also, yet again, validation of the Cypher Robotics value proposition and business plan.

“It’s great to see the excitement continue to build around Captis,” says Connors. “We’re grateful to our partners Ericsson for inviting us to display alongside them, and there’s no doubt 5G and private networks will play a role in this product’s future.”

And that future? It’s now.

“Cypher Robotics has tested and hardened its technology, and the company will soon be shipping its first orders.”

Interested in learning more? You can contact the Cypher Robotics team here.

Cypher Robotics Captis System Generates Buzz at #MODEX2024

Cypher Robotics Captis System Generates Buzz at #MODEX2024

Mar 15, 2024 | Cypher Robotics, Industry News, Inventory Management, Scott Simmie

By Scott Simmie

 

MODEX2024 is a wrap.

And, for Cypher Robotics and its newly released Captis system for cycle counting and precision industrial scanning, the conference was an unmitigated success.

MODEX is one of the world’s preeminent supply chain automation shows. It’s held on alternating years with ProMat – much like the Farnborough International Air Show and the Paris–Le Bourget Air Show. The two supply chain shows attract something like 50,000 global buyers, so they’re really big.

It was at MODEX in Atlanta that Cypher Robotics, a company incubated by InDro Robotics, revealed its new solution. Captis integrates an autonomous mobile robot (AMR) with tethered drone technology for inventory cycle counting. The Captis base can autonomously navigate even narrow warehouse aisles without any infrastructure changes. As it moves down the aisle, a drone ascends from its nest atop the AMR, with a tether attached to the Captis base. That drone can scan any type of code on the box of the products (it’s code-agnostic).

And that tether? It’s a pipeline for both secure data and power. Data captured by the drone reaches the base in realtime, and is instantly uploaded and integrated with the facility’s existing Warehouse Management System (WMS), WCS (Warehouse Control System) and WES (Warehouse Execution System) software. Ample power storage in Captis means autonomous missions can last up to five hours before the system returns to base for a wireless recharge.

What’s more, the Captis system is also capable of RFID scanning and even precise industrial scanning for 2D and 3D digital twins. (These are major additional features, which we’ll be exploring in detail in forthcoming posts.)

We wrote about Cypher Robotics and its product launch here. But we’ve since had a chance to speak with the InDro team that assisted with that launch. InDro Vice President Peter King and Head of Strategic Initiatives Stacey Connors were in Atlanta, working with partners (and AI-fulfilment experts) GreyOrange and global telecommunications innovator Ericsson, which can easily set up private 5G networks in warehouses for ultra-secure data protection and throughput.

The verdict? Captis was a hit.

Below: Stacey Connors with Captis and GreyOrange at MODEX 2024. There’s a reason she looks so happy…

 

Stacey Connors Captis MODEX

INFLECTION POINT

 

The Supply Chain sector is going through something of an automation revolution. At every step of the way, robotics and software are being used to make these processes more efficient – and reduce the burden on human beings normally assigned to the tedious tasks of physically moving products or scanning by hand during cycle counting. There’s been a growing and global shift toward using robotics wherever possible.

“MODEX is getting more and more technical,” says InDro Vice President Peter King. “More and more robotic solutions are taking over that show. Alternatives to the traditional methods of supply chain operations are growing fast. Increasingly, companies are interested in automated ways of loading and unloading trucks, picking and placing objects, bringing inventory into the warehouse – and cycle counting.”

On that last issue, cycle counting and inventory management, King says many at MODEX2024 “identified this as a monster of an issue.”

One of the companies King spoke with at the show uses 26 full-time employees to do manual scanning in its six 750,000 square foot warehouses. It’s boring work, and expensive.

Obviously, there’s got to be a better and more efficient way. Deplying the Captis system would allow those 26 people to be reassigned more satisfying work.

 

DRONE SOLUTIONS

 

There are already some solutions that implement drones for cycle counting. In fact, King says many of those interested in Captis had explored the possibility of drone-only solutions. But, he says, the short flight times between recharging and other issues have led many to seek a more comprehensive option with longer mission times.

That’s a key ingredient in the Captis secret sauce. By fully integrating a tether-based drone with the Captis AMR nest, Cypher Robotics has created a “drobot” (apologies to Skyland players) capable of scanning inventory in a medium-sized warehouse in a single go.

And that capability…has created a lot of interest.

“Captis really blew it out of the water,” says King. “We were the Belle of the Ball.”

There were two Captis systems on display at the show. One was with the GreyOrange exhibit and the second was at Ericsson’s booth. Head of Strategic Initiatives Connor was hearing the same stories – and seeing the same enthusiasm over Captis – as King.

“Most organizations invested in consideration of drone technology for cycle counting within the past two years,” she says, “but concluded the payback and accuracy was not justifiable given the short run time of 10-15 mins per drone.

“So when they recognized this problem has been solved by Cypher’s tethered AMR, the excitement was obvious. Jaws dropped at the five-hour run time – and that no additional infrastructure was needed.”

Below: A lineup of potential clients waiting to discuss Captis at MODEX2024. You can just make out the back of Peter King’s head to the right of the robot. 

Captis MODEX2024

THE INDRO-CYPHER ROBOTICS CONNECTION

 

Cypher Robotics is an Ottawa-based company devoted to using robotics to gain efficiencies in the Supply Chain sector.

According to its website, “Cypher Robotics is modernizing warehouse operations with autonomous technologies that are replacing mundane and labour-intensive job functions. We are committed to delivering robotics solutions that are simple to integrate into an existing warehouse ecosystem, immediately providing an ROI for the operation.”

InDro Robotics could see the growing demand for this kind of solution, and invested in Captis. The two companies also signed an incubation agreement, whereby InDro was able to assist with engineering expertise for the development of the Captis system.

“With Captis, our fully autonomous cycle counting solution, manual cycle counts become a thing of the past. By enhancing operational margins and improving inventory accuracy, Captis significantly boosts efficiency,” continues the Cypher Robotics site.

“Cypher Precision Scan enables us to assist customers in eliminating the labour-intensive task of updating CAD files for scenario planning. Precision Scan offers a fully autonomous solution, efficiently capturing highly accurate digital twins of facilities, empowering better business decisions.”

 

SUPPLY CHAIN SHIFT

 

The global automation for supply chain automation is huge. One company, Precedence Research, estimates this sector was worth $58B US globally in 2022, and predicts it will rise to an astonishing $196.01B by 2032. Companies are looking at using automation wherever it can be implemented for speed, efficiency and accuracy.

Why the sudden push? Well, the global COVID19 pandemic was part of it. Remember all the issues with the Supply Chain during the first year in particular? Well, it was triggered because many people carrying out the manual work in the supply chain weren’t on the job, or were at significantly lower numbers. This coincided with the rise in automated solutions. Soon, technology companies were offering faster and better ways of cycle counting and physically moving product using robotic solutions.

Identifying that demand was the genesis of Cypher Robotics.

In addition to cycle counting, Captis has a separate “crown” or dome that can be placed on the AMR when the tethered drone is not in use. That dome contains RFID sensors, meaning Captis can automously navigate a showroom, for example, and capture all inventory on a regular basis. It’s also capable of precision-level scanning of facilities, uploading updated data for digital twins. For potential clients, these multiple capabilities ticked a lot of boxes.

“I know Peter used this phrase, but we truly did feel like the Belle of the Ball,” says Connors. “The high volume of activity and interest around Captis continued to flow all week.”

King, who is also a veteran of many conferences over the years, described this as his “best” conference ever.

“Anytime I told people that we didn’t want to disrupt their workflow, they lost their minds,” he says. “There was honestly nobody else at the show that had this kind of solution, and there’s incredible pent-up demand for precisely what Captis offers.”

Cypher Robotics Captis

INDRO’S TAKE

 

InDro Robotics has watched Cypher Robotics and its Captis system take shape over the past two years. It’s been a very methodical process, with an eye on a comprensive and integrated solution for industry-at-large.

The result, Captis, is the first made-in-North America solution we are aware of that combines tethered drone technology (to reach those *really* high bins) with an Autonomous Mobile Robot. The company has a major Canadian retailer (with more than 300 locations across Canada) as a partner, and carried out R&D and testing for many months in its warehouses to perfect the solution.

“We’re pleased with the tremendous interest Captis generated at MODEX2024,” says InDro Robotics CEO and Cypher Robotics early investor Philip Reece.

“It took a lot of engineering to create this solution, and I’m proud of the assistance InDro was able to provide Cypher Robotics. Captis is a unique solution – and, based on the interest at MODEX2024, is going to be a huge success.”

You can learn more about Cypher Robotics, including contact info, here.

Cypher Robotics announces Captis – a new solution for industrial scanning

Cypher Robotics announces Captis – a new solution for industrial scanning

Mar 12, 2024 | Cypher Robotics, InDro News, Inventory Management, Scott Simmie

By Scott Simmie

 

Perhaps you’ve already seen the news.

A new Canadian tech company, Cypher Robotics, has unveiled a groundbreaking solution for inventory cycle counting and precision scanning at the industrial level. The company made its announcement at MODEX2024, one of the premiere global conferences for the supply chain ecosystem. The company also announced key partnerships with AI-driven fulfilment experts GreyOrange and global telecommunications innovator Ericsson. In addition, Cypher revealed it has partnered with an as-yet unnamed Canadian retail giant with more than 300 locations.

The system integrates an autonomous ground robot with tethered drone technology, allowing for scanning missions lasting some five hours in duration between charging. Data is uploaded in realtime to existing Warehouse Management System (WMS), WCS (Warehouse Control System) and WES (Warehouse Execution System) software. What’s more, the system can navigate even tight aisles autonomously without any infrastructure changes.

So why is InDro keen on sharing this news? We’ll get to that.

First, have a look at how it works:

THE INDRO CONNECTION

 

If you guessed InDro has a strong connection with Cypher Robotics, you were correct.

InDro Robotics has an incubator agreement with Cypher, and helped to develop this product. InDro is also an investor in the company.

“This is the future of warehouse robotics,” says InDro Robotics CEO Philip Reece, who has founded or co-founded multiple successful companies in the robotics, drone and R&D spaces.

“It completely eliminates the dull and repetitive task of scanning by hand, freeing up employees to do more satisfying work. It also frees up or eliminates the need for equipment like modified forklifts that have been previously required for the task.”

Reece was quoted in a news release launching Cypher Robotics and its flagship solution, which is called Captis.

Here’s a look at the system. The tethered drone ascends vertically from the Captis base, scanning product as the ground robot moves seamlessly down aisles as narrow as five feet (1.524 metres).

Below: The Captis system integrates a Robot Operating System (ROS) based drone with an autonomous ground robot

 

Cypher Robotics Captis

THE NEWS

 

More detailed information about Cypher Robotics and Captis was revealed in the following news release:

(ATLANTA): Cypher Robotics today unveiled a new standard for efficient and accurate cycle counting scanning for industry at MODEX2024 – one of the sector’s leading annual global conferences. The company also revealed partnerships with AI-driven automation leaders GreyOrange and technology company Ericsson, plus a leading Canadian retailer.

Incubated by Canada’s InDro Robotics, Cypher calls its solution ‘The Future of Warehouse Robotics’, and here’s why: It combines both aerial and ground robotics technology into a single, integrated package.

That solution is called Captis – an autonomous ground vehicle that can find its way around warehouses all on its own. It won’t bump into people or objects, and requires no infrastructure changes. When it’s time for cycle counting, it uses drone technology attached to the ground robot with a tether – used to power the drone and for realtime data transfer. The drone ascends vertically and begins scanning products (it’s code-agnostic) as the Captis base navigates its way down even-narrow corridors.

Based in Ottawa, Cypher Robotics has a specialised engineering team and state-of-the-art fabrication. Comprehensive, real-world testing has been carried out over several months in partnership with a major Canadian retailer that has more than 300 locations across the country.

The system can capture data with 99.9 per cent accuracy autonomously for up to five hours per mission. That data is automatically integrated with existing Warehouse Management System (WMS), WCS (Warehouse Control System) and WES (Warehouse Execution System) software. Captis eliminates the costs associated with manual cycle counts, improves inventory accuracy, and ensures seamless timeline replenishment while avoiding both over- and under-stocking items.

What’s more, Captis can simultaneously carry out highly detailed precision scans of infrastructure (more on this in the future).

Sound technologically complex? It is. But it’s also a breeze to operate. 

“Captis is completely a hands-off product,” says Philip Reece, who has founded or co-founded multiple successful companies in the robotics, drone and R&D spaces. Those include InDro Robotics, the Canadian leader in ground and aerial robotics R&D, which has also invested in Cypher Robotics.

“When we say this is ‘the future of warehouse robotics’, we mean it. It completely eliminates the dull and repetitive task of scanning by hand, freeing up employees to do more satisfying work. It also frees up or eliminates the need for equipment like modified forklifts that have been previously required for the task.”

Cypher has partnered with warehouse fulfilment experts GreyOrange and global telco innovator Ericsson.

“The Captis autonomous cycle counting solution is powered by GreyOrange’s GreyMatter, our fulfillment orchestration platform,” says Akash Gupta, Co-Founder and CEO, GreyOrange. “We are excited that Cypher Robotics has joined GreyOrange’s Certified RangerTM Network (CRN) ecosystem. Cypher’s Captis solution is a great option for companies new to automation and robotics to begin leveraging such tech since only one bot is needed per warehouse on average.”

Manish Tiwari, Head of Private Cellular Networks, Ericsson Business Area Enterprise Wireless Solution says: “Captis is an innovative solution that listens to the industry’s needs and efficiently answers them. Being connected to Ericsson Private 5G allows Captis to traverse warehouses while maintaining consistent connectivity which ensures the safety of employees and devices. The low latency of the connection allows for immediate validation of data and the ability to re-capture it to maintain accuracy. The solution ensures that the organization’s data is protected throughout the process.  Ericsson is looking forward to continued collaboration and innovation with Cypher that will help our customers’ digitalization efforts.”

Below: Captis is built for scanning and is code-agnostic. Barcodes, QR codes and more are scanned autonomously and the data instantly integrated with existing warehouse management software

Cypher Robotics Captis

INDRO’S TAKE

 

We are obviously excited about this announcement. The supply chain is a huge sector, and the automation of the supply chain is growing rapidly. Cypher Robotics believes this is the first system manufactured in North America to integrate aerial and ground robotics in a single solution.

“It’s been a very satisfying process to see Cypher Robotics develop Captis with incubation assistance from us,” says InDro Robotics CEO Philip Reece.

“It was already a technologically challenging build to create a ground robot that can navigate tight spaces autonomously in an unfamiliar setting. Combining that with drone technology adds a whole other level of complexity. We’re pleased that InDro was able to assist with incubation and look forward to seeing where Captis goes.”

In addition to cycle counting, the Captis system also has Precision Scanning capabilities. It can provide updated 2D and 3D digital twins as it carries out its other work, empowering operations with a digital environment for scenario planning. It’s also capable of RFID scanning.

More on these other significant features…to come.